← News

Brick Look Tiles: An Australian Buying Guide

02 September 2026 · Updated 22 November 2026 · Tile Touch

Ashcroft Red Brick Look Italian Porcelain Tile 60 x 250mm installed

Quick answer

Brick look tiles are porcelain tiles shaped like narrow bricks, usually laid in a running bond or stacked pattern on walls, splashbacks and floors. Choose a gloss finish for a bright, reflective splashback and a matte finish for a softer, more natural wall or floor, then check the slip rating (P-rating) if the tile is going anywhere underfoot or in a wet area.

Key takeaways

  • Brick look tiles are porcelain, so they handle kitchens, bathrooms and outdoor-adjacent walls better than most paints or wallpapers.
  • Sizes range from short 50 x 150 mm bricks up to long 48 x 450 mm formats, which changes how busy or stretched the wall reads.
  • Gloss finishes bounce light and suit splashbacks; matte finishes hide marks and feel more relaxed.
  • For floors and wet areas, read the slip rating: P2 is fine for most walls and dry floors, P4 and P5 give more grip.
  • Order a sample before you commit, since colour and finish look different under showroom light versus your own.

What brick look tiles actually are

These are rectangular porcelain tiles made to mimic the proportions of a brick. Instead of real clay masonry, you get a hard-wearing, low-maintenance surface that wipes clean and copes with water. That makes them a common pick for kitchen splashbacks, bathroom walls, laundry nooks and feature walls in living areas.

Because every tile here is porcelain, you also get consistency. A painted brick wall chips and marks; porcelain holds its colour and shrugs off splashes.

Picking a size

Size is the first decision, because it sets the mood of the whole wall. Shorter bricks read as classic and busy; longer bricks stretch a wall and feel calmer and more modern.

The Play Brick range (Cipria, Senape, Cielo and Champagne, all 50 x 150 mm matte) sits at the short, traditional end. It gives you plenty of grout lines and a handmade feel, which works well on a cottage kitchen splashback or a small bathroom.

In the middle, the Cortine Bone White (45 x 230 mm) and London Mini Bricks Smoke Décor (60 x 240 mm) give a slightly longer brick without going extreme. At the long end, the Lazer Terracotta and Canvaz Blue (both 48 x 450 mm) and the Hatsu Long Brick tiles (47.5 x 304 mm) stretch out across a wall for a cleaner, linear look.

If you want a brick effect without laying individual slivers, the Aurora Mosaic Nuvola Honed Nova Brick comes as a 300 x 300 mm sheet, so the brick pattern is pre-set on a mesh and goes up faster.

Gloss or matte

Finish changes both the look and the upkeep. Gloss tiles reflect light, which brightens a small or dark kitchen and makes a splashback easy to wipe. The Hatsu Long Brick in Aqua and in Oribe Green are both gloss, so they catch the light and lift the colour.

Matte tiles are flatter and more forgiving of fingerprints and water spots. Most of the range here is matte, including the Play Brick colours, the Canvaz Blue, the Ashcroft White and the Cortine Bone White. Matte suits a calmer wall or a floor where glare would be distracting.

Slip ratings for floors and wet areas

If a brick look tile is going on a wall only, slip rating barely matters. The moment it goes on a floor, in a shower base, or anywhere that gets wet underfoot, the P-rating becomes the number to check.

Both Hatsu Long Brick tiles are rated P2, which is suited to walls and dry interior floors. The Canvaz Blue is rated P4 and the Ashcroft White is rated P5, giving more grip for floors and wetter zones. As a general rule, higher P numbers mean more slip resistance, so match the rating to the room.

Colour and where it suits

Brick look tiles come in soft neutrals and stronger colours. Neutral tones (Ashcroft White, Cortine Bone White, the Champagne and Cipria Play Bricks) keep a space light and let your cabinetry or tapware lead. The London Mini Bricks in Smoke sit in the grey family for a quieter, more muted wall.

For colour, the Hatsu Long Brick in Aqua and Oribe Green, the Canvaz Blue and the Lazer Terracotta all bring a defined hue. These work well as a feature splashback or a single accent wall where you want the tile to do the talking, with everything else kept plain.

Compare the range

Tile Size Finish Slip Origin
Hatsu Long Brick Aqua 47.5 x 304 mm Gloss P2 Japan
Hatsu Long Brick Oribe Green 47.5 x 304 mm Gloss P2 Japan
Play Brick Cipria / Senape / Cielo / Champagne 50 x 150 mm Matte Not stated Italy
Cortine Bone White 45 x 230 mm Matte Not stated Not stated
London Mini Bricks Smoke 60 x 240 mm Matte Not stated Not stated
Lazer Terracotta 48 x 450 mm Not stated Not stated Italian
Canvaz Blue 48 x 450 mm Matte P4 Italy
Ashcroft White 60 x 250 mm Matte P5 Italy
Aurora Mosaic Nuvola Nova Brick 300 x 300 mm Honed, glazed Not stated Not stated

FAQs

Can brick look tiles go on the floor?

Yes, as long as the tile has a suitable slip rating for the room. For wetter floors, look at tiles rated P4 or P5, such as the Canvaz Blue (P4) or the Ashcroft White (P5), rather than a wall-oriented P2.

Are brick look tiles good for a kitchen splashback?

They are a popular splashback choice because porcelain wipes clean and handles heat and splashes. A gloss option like the Hatsu Long Brick reflects light behind a benchtop, while a matte Play Brick gives a softer, handmade look.

What size brick tile should I choose?

Shorter bricks (around 50 x 150 mm) feel traditional and busy, while longer formats (up to 48 x 450 mm) stretch a wall and read more modern. Hold a sample against your wall to judge how many grout lines you want to see.

Can I get a sample before buying?

Yes. Tile Touch offers samples and ships Australia-wide, and you can also see the ranges in person at the Waterloo showroom in Sydney.

Do these need special cleaning?

No. Porcelain is low maintenance and only needs regular wiping with a mild cleaner. Matte finishes tend to hide water spots, while gloss finishes show them more but wipe back easily.

Related guides