← News

Small Bathroom Tile Ideas: Layouts That Make Space Feel Bigger

19 November 2026 · Tile Touch

London Mini Bricks Italian Porcelain Tile 60x240mm White installed

Quick answer

To make a small bathroom feel bigger, run tiles in a continuous layout with few grout lines, keep walls and floor in a close colour family, and use light or glossy finishes to bounce daylight around. A large-format floor like a 600 x 600 mm tile cuts visual clutter, while a vertical brick on the walls draws the eye up.

Key takeaways

  • Fewer, larger tiles mean fewer grout lines, which reads as more floor and less busyness.
  • Gloss finishes reflect light and suit walls; matte or higher-grip tiles are the safer call underfoot and in wet zones.
  • Carrying one tile or one colour from floor to wall removes visual breaks and stretches the room.
  • Vertical brick layouts add height; horizontal ones add width. Pick the direction your room is short on.
  • Check the slip rating (P ratings) before you tile a shower floor or a wet bathroom floor.

Start with the floor

The floor sets the tone for a small bathroom. A larger tile with tight grout joints gives an uninterrupted surface, so the eye reads one continuous plane rather than a grid. The Clovin Grey 600 x 600 mm is a porcelain floor tile in a natural matte finish with a P4 slip rating, which makes it a sensible choice for a bathroom floor that needs some grip.

If you prefer a smaller floor tile for better fall to the drain, a mosaic or compact square still works. The Bridges range in matte porcelain comes in 23 x 23 mm, 48 x 48 mm and 97 x 97 mm, all rated P5, so you can match grip to a shower base and scale the tile to the room.

Take the tile up the wall

One of the quickest ways to make a small bathroom feel larger is to reduce the number of different materials. Running the same tile, or the same colour family, from the floor onto the walls removes the horizontal break that chops a room in half. A close tonal match between floor and wall makes the corners harder to read, and the space feels more open.

For walls where grip matters less, a gloss tile earns its place by reflecting light. The Ligato White Gloss 100 x 100 mm is a glossy porcelain square that keeps walls bright. The Rabat Turquoise Gloss 100 x 100 mm is a glossy ceramic option if you want colour without going dark.

Use brick layouts to change proportions

Brick-format tiles are a small-bathroom favourite because the direction you lay them changes how the room feels. Stack them vertically and the eye travels up, which helps a room with a low feel. Lay them horizontally and the wall appears to stretch sideways.

The Lazer Brick Latte is a 48 x 450 mm matte porcelain brick with a P4 rating. The London Mini Bricks Clay Decor is a smaller 60 x 240 mm matt porcelain brick, also P4. The Petite Rosa 64 x 200 mm is a matt porcelain brick rated P5. Each gives you long, thin lines you can run vertically or horizontally depending on what the room needs.

Light, gloss and colour

Light finishes and gloss both help a tight bathroom. A glossy tile throws daylight and artificial light back into the room, which matters most when there is one small window or none. Matte tiles absorb more light but hide water spotting and footprints, so many people use matte on the floor and gloss on the walls.

Colour does not have to mean white. Soft, light colours still open a room up. The Bridges Duck Egg Blue Matt 48 x 48 mm and Bridges Mint Green Matt 23 x 23 mm are gentle tones that keep things calm and bright. The Hatsu Square Aqua is a 72 x 72 mm gloss porcelain tile from Japan with a P2 rating, which suits walls and splashbacks where its shine can do its job. Because P2 is a low slip rating, keep it off wet floors.

Feature zones without the clutter

In a small bathroom, one feature area reads better than busy patterns everywhere. A single niche, the shower wall or the vanity splashback can take a mosaic or a bolder tile while the rest of the room stays plain. The Bridges Army Green Matt, available in 23 x 23 mm and 97 x 97 mm, works as a contained feature in matte porcelain. For a textured, outdoor-style look in a courtyard bathroom or an external wall, the Clovin Graphite Crazy Pave is a porcelain tile rated for external use.

Match the tile to the job

Tile Size Finish Slip Good for
Clovin Grey 600 x 600 mm Natural matt P4 Main floor
Lazer Brick Latte 48 x 450 mm Matte P4 Walls, vertical brick
London Mini Bricks Clay Decor 60 x 240 mm Matt P4 Walls, feature
Petite Rosa 64 x 200 mm Matt P5 Walls and floor
Ligato White Gloss 100 x 100 mm Gloss Walls, light reflection
Hatsu Square Aqua 72 x 72 mm Gloss P2 Walls, splashback
Bridges Mint Green Matt 23 x 23 mm Matte P5 Shower base, feature

FAQs

What size tile is best for a small bathroom floor?

A larger tile such as a 600 x 600 mm reduces grout lines and makes the floor read as one surface, which feels more open. If you need a steeper fall to the drain, a smaller tile like a 23 x 23 mm or 48 x 48 mm mosaic flexes to the slope better.

Should I use gloss or matte tiles in a small bathroom?

Gloss tiles reflect light and help brighten a dark room, so they work well on walls and splashbacks. Matte tiles hide water marks and usually offer more grip, which makes them the safer choice on the floor and in wet areas.

Do dark tiles make a small bathroom look smaller?

Dark tiles absorb light, so using them everywhere can close a room in. A good middle ground is to keep the main walls and floor light and use a darker tile, like a matte green or a crazy pave, in one contained feature area.

Which way should I lay brick tiles in a small bathroom?

Lay brick tiles vertically to draw the eye up and add a sense of height, or horizontally to make a wall feel wider. Choose the direction based on the dimension your bathroom is short on.

Can I order samples before tiling?

Yes. Tile Touch offers samples so you can see colour and finish in your own light, and you can also visit the Waterloo showroom in Sydney. Orders ship Australia-wide.

Related guides